Users Manual Instruction Manual

185
CATC BTTRAINER 2.11 CHAPTER
User’s Manual
Example
result = HCIReadEncryptionMode();
Trace("HCIReadEncryptionMode returned: ", result[0], "\n");
if (result[0] == "Success")
{
Trace("Encryption mode is: 0x", result[1], "\n");
}
HCIReadFailedContactCounter
HCIReadFailedContactCounter(Address)
Return value
Returns a list with two values: status and FailedContactCounter
Status (element 0) is one of the following:
• "Success"
•"Failure"
• "Not connected"
• "Failed: Not found"
Comments
This command will read the value for the Failed_Contact_Counter parame-
ter for a particular connection to another device.
Example
Address = '010203040506';
result = HCIReadFailedContactCounter (Address);
Trace(result);
HCIReadHoldModeActivity
HCIReadHoldModeActivity ()
Return value
Returns a list with two values: status and HoldModeActivity
Parameter Meaning Default Value Comments
Address
Parameter Meaning Default Value Comments
N/A