Users Manual Instruction Manual

182
CATC BTTRAINER 2.11 CHAPTER
User’s Manual
• “Failed: Device not found”
• “Not connected”
Offset (element 1) is the two-byte value of the clock offset.
Comments
Reads the clock offset to remote devices.
Example
result = HCIReadClockOffset();
Trace("HCIReadClockOffset returned: ", result[0], "\n");
if (result[0] == "Success")
{
Trace("Clock offset is: 0x", result[1], "\n");
}
HCIReadConnectionAcceptTimeout
HCIReadConnectionAcceptTimeout()
Return values
Returns a list with two values: status and timeout.
Status (element 0) is one of the following:
• “Success”
• “Failure”
Timeout (element 1) is the two-byte value of the timeout, interpreted as
multiples of 0.625-msec intervals.
Comments
Reads the current timeout interval for connection. The timeout value
defines the time duration from when the Host Controller sends a Connec-
tion Request event until the Host Controller automatically rejects an
incoming connection.
Example
result = HCIReadConnectionAcceptTimeout();
Trace("ReadConnectionAcceptTimeout returned: ", result[0],
"\n");
if (result[0] == "Success")
{
Parameter Meaning Default Value Comments
N/A