Users Manual Instruction Manual

180
CATC BTTRAINER 2.11 CHAPTER
User’s Manual
HCIReadBDADDR
HCIReadBDADDR()
Return values
Returns a list with two values: status and address.
Status (element 0) is one of the following:
• “Success”
• “Failure”
Address (element 1) is the address of the local device.
Comments
This command is used to read the value for the BD_ADDR parameter. The
BD_ADDR is a 48-bit unique identifier for a Bluetooth device.
Example
LocalAddress = HCIReadBDADDR();
if(LocalAddress [0] == "Success")
Trace("Local BDADDR:", LocalAddress[1], "\n");
HCIReadBufferSize
HCIReadBufferSize()
Return values
Returns a list with five values: status, ACL packet length, SCO packet
length, ACL number of packets, and SCO number of packets.
Status (element 0) is one of the following:
• “Success”
• “Failure”
ACL packet length (element 1) is the two-byte value of the maximum
length (in bytes) of the data portion of each HCI ACL data packet that the
Host Controller is able to accept.
Parameter Meaning Default Value Comments
N/A
Parameter Meaning Default Value Comments
N/A