Users Manual Instruction Manual

177
CATC BTTRAINER 2.11 CHAPTER
User’s Manual
Comments
Specifies the PIN code to use for a connection.
Example
result = HCIPINCodeRequestReply('6C421742129F9', "New PIN
Code");
Trace("HCIPINCodeRequestReply returned: ", result, "\n");
HCIQoSSetup
HCIQoSSetup(Address, ServiceType, TokenRate,
PeakBandwidth, Latency, DelayVariation)
Return values
Returns a list with eight values: status, HCI handle, flags, service type,
token rate, peak bandwidth, latency, and delay variation.
Status (element 0) is one of the following:
Parameter Meaning Default Value Comments
Address Bluetooth
address of the
remote
ServiceType The one-byte
service type:
0=No traffic;
1=Best effort;
2=Guaranteed
TokenRate The four-byte
token rate
value in bytes
per second
Peak
Bandwidth
The four-byte
peak band-
width value in
bytes per sec-
ond
Latency The four-byte
latency value
in microsec-
onds
Delay
Variation
The four-byte
delay varia-
tion value in
microseconds