Users Manual Instruction Manual

157
CATC BTTRAINER 2.11 CHAPTER
User’s Manual
HCICATCPageScanModeResponse
HCICATCPageScanModeResponse(Mode)
Return Events
• Command Complete: Will return after the operation has been com-
pleted.
Comment
This command will configure local device to respond to an incoming
LMP_Page_Scan_Mode_Req PDU.
Used in Test Cases
HCICatcQos
HCICatcQos(HCI_Handle,Poll_Interval,N_bc)
Return
• Command Status will return after operation has started
• Command Complete will return after the operation has completed
TP/LIH/BV-71-C
Parameter Values Description
Mode
1 Byte
0 -- Accept
(default)
1 -- Reject
2-0xFF default
Test Case Description
TP/LIH/BV-68-C Need to reject an incoming send LMP_Page_Scan_Mode_Req PDU
Parameter Values Description
HCI_Handle
2 Bytes
Poll_Interval
1 Byte
According to the poll_interval parameter of
LMP_Quality_Of_Service PDU
Poll_Interval
1 Byte
According to the poll_interval parameter of
LMP_Quality_Of_Service PDU