Users Manual Instruction Manual

140
CATC BTTRAINER 2.11 CHAPTER
User’s Manual
Return value
Array of Bluetooth addresses that were found during the inquiry.
Comments
Calling DoInquiry() will block for the duration specified by Timeout. The
function returns an array of devices that were found during the inquiry.
These can be addressed individually.
The current version of Merlin's Wand hardware only supports GIAC inquir-
ies.
Example
# Use default parameters
Devices = DoInquiry();
Trace("First device was: ", Devices[0]);
GetDeviceClass
GetDeviceClass()
Return value
• Class of device
• “Failure”
Comments
Returns the current device class of BTTrainer
Example
Trace("Merlin's Wand device class: ", GetDeviceClass());
GetRemoteDeviceName
GetRemoteDeviceName(Address)
Parameter Meaning Default Value Comments
N/A
Parameter Meaning Default Value Comments
Address Bluetooth
address of
device in
question