Users Manual Instruction Manual

130
CATC BTTRAINER 2.20 APPENDIX A
User’s Manual
A.15.7 RegisterBNEP
A.15.8 DeregisterBNEP
A.15.9 SetControlTimeout
A.16 TCI Commands
A.16.1 CATC_EnterTestMode
This command puts a remote slave device into test mode.
A.16.2 CATC_TestControlMaster
Enter Test Mode as a master device and start the test according to specified parameters.
Command Parameters Examples Comments
NA
Command Parameters Examples Comments
NA
Command Parameters Examples Comments
BNEP_ADDR
Timeout
Command Parameters Examples Comments
N/A
Return Events
Command Status: Will return after the operation has started.
Command Complete: Will return after the operation has completed.
Command Parameters Examples Comments
TestScenario
Other Parameters in SetErrors dialog (see
screenshot below)
Return Events
Command Status: Will return after the operation has started.
Command Complete: Will return after the operation has completed.