Users Manual Instruction Manual

125
CATC BTTRAINER 2.20 APPENDIX A
User’s Manual
A.13.3 Start_TCS_Call
This command must be called right after TCSOpenChannel. It automatically sends a
sequence of TCS messages according to the Intercom profile specification of the TCS state
machine. After successful execution of this command, TCS state machine is in ACTIVE
state and SCO connection is opened.
A.13.4 Disconnect_TCS_Call
This command is called to close an existing TCS connection according to the Intercom
profile specification of the TCS state machine, close the L2CAP connection, and close the
SCO connection.
A.13.5 Send_Info_Message
This command can be called after a TCS channel is opened. It sends an INFORMATION
TCS message with a called party number.
Command Parameters Examples Comments
N/A
Return Events
Start_TCS_Call_Complete
Start_TCS_Call_Error
Command Parameters Examples Comments
N/A
Return Events
Disconnect_TCS_Call_Complete
Disconnect_TCS_Call_Error
Command Parameters Examples Comments
Phone_Number 408 727 6600 Phone number may contain up
to 10 digits.
Return Events
Send_Info_Complete
Send_Info_Error