Users Manual Instruction Manual

102
CATC BTTRAINER 2.20 APPENDIX A
User’s Manual
Used in Test Cases
A.7.12 CATC_Page_Scan_Mode_Request
This command will send LMP_Page_Scan_Mode_Req PDU to the remote device.
Used in Test Cases
A.7.13 CATC_Qos
This command will send LMP_Quality_Of_Service PDU over ACL connection according
to the test case.
Return Events
Command Status: Will return after the operation has started.
Command Complete event will return after the operation has completed: LMP_Page_Mode_Req PDU was sent
Test Case Description
TP/LIH/BV-65-C Need to send LMP_Page_Mode_Req PDU
TP/LIH/BV-66-C Need to send LMP_Page_Mode_Req PDU
Command Parameters Examples Comments
HCI_Handle .
PagingScheme
PagingSchemeSettings
Return Events
Command Status: Will return after the operation has started.
Command Complete event will return after the operation has completed: LMP_Page_Scan_Mode_Req PDU was sent
Test Case Description
TP/LIH/BV-70-C Need to send LMP_Page_Scan_Mode_Req PDU
TP/LIH/BV-71-C Need to send LMP_Page_Scan_Mode_Req PDU
Command Parameters Examples Comments
HCI_Handle
Poll_Interval According to the poll_interval
parameter of
LMP_Quality_Of_Service PDU