Users Manual Instruction Manual

101
CATC BTTRAINER 2.20 APPENDIX A
User’s Manual
A.7.9 CATC_Modify_Beacon
This command will send LMP_Modify_Beacon PDU to notify parked devices about beacon parameter change.
Used in Test Cases
A.7.10 CATC_Override_Remote_Features_Check
This command will override remote device LMP feature check in case local device needs to initiate a procedure that remote
device doesn't support. Remote device LMP features are set in the LMP_Features_Req PDUs that are exchanged during
the connection establishment. Example of the procedures are Sniff, Park, and Hold.
A.7.11 CATC_Page_Mode_Request
This command will send LMP_Page_Mode_Req PDU to the remote device.
Command Parameters Examples Comments
HCI_Handle
BeaconMaxInterval
BeaconMinInterval
Return Events
Command Status: Will return after the operation has started.
Command complete: Will return after the operation has completed: LMP_Modify_Beacon PDU was sent.
Test Case
TP/LIH/BV-25-C
Command Parameters Examples Comments
HCI_Handle
Return Events
Command complete: Will return after the operation has completed.
Command Parameters Examples Comments
HCI_Handle
PagingScheme
PagingSchemeSettings