Users Manual Instruction Manual

CATC BTTRAINER 2.20 APPENDIX A

User’s Manual

Used in Test Cases

A.7.3 CATC_Disconnect

This command will start a modified ACL disconnection procedure in order to verify that the

IUT closes the link according to the TP/LIH/BV-04-C test case. During the procedure,

LMP_Detach is sent, and after 3 seconds LMP_Features_Req PDUs is sent.

Used in Test Cases

A.7.4 CATC_Get_Park_Mode

This command gets current firmware mode that defines whether to park a device by

PM_ADDR or by BD_ADDR when HCI_Park_Mode command is received..

Test Case

TP/LIH/BV-35-C

Command Parameters Examples Comments

HCI_Handle

Test_Scenario Values:

0 - Performs

TP/PROT/ARQ/BV-25-C test

case (Retransmissions of DV

packet)

1 - Performs

TP/PROT/ARQ/BV-26-C test

case (Uncorrectable DV packet)

Timeout In ms

Return Events

Command Complete: Will return after the operation has completed.

Disconnection Complete event will return after the operation has completed: LMP_Detach and LMP_Features_Req are

sent

Test Case

TP/LIH/BV-04-C

Command Parameters Examples Comments

N/A

Return Events

Command Complete: Will return after the operation has completed.