Users Manual Instruction Manual

93
CATC BTTRAINER 2.20 APPENDIX A
User’s Manual
A.3.45 Write_PIN_Type
Write_PIN_Type will specify whether the Host supports variable PIN or only fixed PINs.
A.3.46 Write_Scan_Enable
The Write_Scan_Enable command will write the value for the Scan_Enable configuration
parameter into BTTrainer, which controls whether or not BTTrainer will periodically scan
for page attempts and/or inquiry requests from other Bluetooth devices.
A.3.47 Write_Stored_Link_Key
Write_Stored_Link_Key command will write a link key to the BTTrainer host controller.
Return Events
Write_Page_Timeout_Complete
Write_Page_Timeout_Error
Command Parameters Examples Comments
PIN_Type 0 0x00=Variable PIN
0x01=Fixed PIN
Return Events
Write_PIN_Type_Complete
Write_PIN_Type_Error
Command Parameters Examples Comments
Scan_Enable 3 0x00=No Scans enabled.
0x01=Inquiry Scan enabled
Page Scan disabled.
0x02=Inquiry Scan disabled.
Page Scan enabled.
0x03=Inquiry Scan enabled
Page Scan enabled. (Default)
Return Events
Write_Scan_Enable_Complete
Write_Scan_Enable_Error
Command Parameters Examples Comments
BD_ADDR 0x010203040506
Link_Key 0x01020304