Users Manual Owner's manual

28
BTTracer Protocol Analyzer User’s ManualCATC SW Version 2.20
Step 2 Select from the menu: Setup > Analyzer.
The Analyzer Setup dialog box opens.
Step 3 Select the one of the entity that you want to update from the list.
Step 4 Click the Update button.
The familiar Open File dialog box will open allowing you to select the proper file,
as shown below:
Step 5 Select the file to be updated, and select the Open button.
At this time, the application would start the update process. A progress bar in the
dialog would show the progress of the update process.
Please note that in some cases this process would take up to several minutes to
complete.
Step 6 When a the application notifies that the update process is done,