Users Manual Owner's manual

BTTracer Protocol Analyzer User’s ManualCATC SW Version 2.20

Step 6 To complete the update, power cycle the analyzer (turn the

unit off then back on).

If you are running Windows 2000, the Analyzer will automatically

reboot, and the following message will appear:

Step 7 Click OK.

In this instance, you do not need to power cycle the Analyzer (turn

off then back on).

Manual Updates

If you prefer, you can manually update the Firmware, BT firmware and/or

BusEngine through the 'Analyzer Setup' dialog. To do this follow these

steps:

Step 1 Make sure that the BTTrainer application is not active.