Software Ver.2.0 Owner's manual

Classes of the C++ Interface C++ Interface
2-10 CATC IBTrainer InfiniBand Exerciser API Reference
“IGCGUIDInfo Properties” on page 4-7 .
This class holds the properties for the InfiniBand NodeDescription
struct. Each generator class has one
NodeDescription class object. For
the properties refer to
“IGCNodeDescription Properties” on page 4-7 .
This class holds the properties for the InfiniBand
SwitchInfo struct.
Each generator class has one
SwitchInfo class object. For the properties
refer to the IB Spec.
This class holds the properties for the InfiniBand LinearForwardingTable
struct. Each generator class has one
LinearForwardingTable class object.
For the properties refer to the IB Spec.
IGCPerformance Class
The class IGCPerformance is derived from IGCObject and represents a
container for the result of the performance measurement that is
controlled via methods in the generator class. It contains the following
properties:
Table 3 Properties of the IGCPerformance Class
Property Name Range Default Access Description
RefClk 64bit 0 RW Time in 16ns since last
Measurement
RcvePyldHdr 64bit 0 RW Received Dwords from LRH to
End of Pyld, followed by EGP
RcvePyld 64bit 0 RW Received Dwords from Start of
Pyld to End of Pyld, followed by
EGP
RcvePkt 64bit 0 RW Number of Received Packets
followed by EGP
RcvePktBad 64bit 0 RW Number of Received Packets
followed by EBP
IGCNodeDescription Class
IGCSwitchInfo Class
IGCLinearForwarding Table Class