Instructions

AP033 Active Differential Probe
32
AP033 Performance Verification Test Record
Permission is granted to copy and use the following pages to record the AP033
Performance Verification results. File the completed record as required by applicable
internal quality procedures.
The section in the test record corresponds to the parameters tested in the performance
verification procedure. The numbers preceding the individual data records correspond to
the steps in the procedure that require the recording of data. Results to be recorded in
the column labeled “Test Result” are the actual specification limit check. The test limits
are included in all of these steps. Other measurements and the results of intermediate
calculations that support the limit check are to be recorded in the column labeled
“Intermediate Results.”
Model:
AP033
Serial Number:
Asset or Tracking
Number:
Date:
Technician:
MODEL SERIAL NUMBER
CALIBRATION
DUE DATE
OSCILLOSCOPE
DIGITAL
MULTIMETER
LEVELED SINE WAVE
GENERATOR
HF SINE WAVE
GENERATOR
FUNCTION
GENERATOR
1
N/A
1. The function generator provides stimulus for making relative measurements. The output amplitude of the
generator is measured with the DMM or oscilloscope in the procedure. Thus, the generator is not required
to be calibrated.