users guide B100 single-line business telephone
B100 TELEPHONE DIAGRAM TABLE OF CONTENTS 1) FEATURES........................................................................……........................2 1.1 1.2 1.3 1.4 1.5 1.6 2) UNPACKING THE B100......................................................................................2 3) INSTALLATION......................................................…........................................3 3.1 3.2 3.3 DESKTOP INSTALLATION.............................................................................
1. FEATURES 3. INSTALLATION The Teledex B100 is a single-line telephone with a compact footprint and basic functionality that is ideal for non-critical areas that do not require multiple lines or displays. 3.1 DESKTOP INSTALLATION Your B100 has these useful features: 1.1 1.2 1.3 1.4 1.5 1.6 FLASH – Sends an electronic hook-switch signal for use with special phone services such as call waiting LAST NUMBER REDIAL – Lets you quickly dial the last number dialed. MUTE – Mutes the handset microphone.
3.3 WALL MOUNTING CLIP 6. HANDSET VOLUME CONTROL 1) Located on the front of the telephone, above the speaker grill, is the wall mounting clip. Remove this clip by firmly pushing it upward, in the direction of the hook switch. There are three (3) volume levels for the handset volume. To increase or decrease the handset volume, press the VOLUME UP or DOWN keys. 2) Rotate the clip 180º so that the side with the protruding edge is towards the top. This edge will hold the handset (please refer to figure 5.
REQUIREMENTS OF PART 68- FCC RULES IMPORTANT SAFETY INSTRUCTIONS This device has been granted a registration number by the Federal Communications Commission, under Part 68 rules and regulations for direct connection to the telephone lines. In order to comply with these FCC rules, the following instructions must be carefully read and applicable portions followed completely: 1.
8
