User's Manual
Table Of Contents
- Copyright
- Disclaimer
- Emissions
- _
- Table of Contents
- _
- TS4000 Overview
- _
- Configuration Program
- _
- Serial Port
- _
- Radio Setup
- _
- AirNet Packet Protocol
- Overview
- Configuration Options
- Control and Status Strings
- Master-Slave System Setup
- Polled System with Store and Forward Repeaters
- CSMA System Setup
- _
- GPS Configuration
- _
- Testing
- Remote Diagnostics
- Upgrading Firmware
- _
- Licensing
- _
- Service and Support
- _
- Warranty
- _
- Appendix A - Serial Ports
- _
- Appendix B – ASCII Character Set
- _
- _
- Appendix C – Control and Status Strings
- _
- Appendix D – Internal Jumper Block
- _
TS4000 Radio Modem User’s Manual TS4000 Overview 2
Integrated AirNet Packet Data Protocol
Allows user directed transmissions to only selected destinations.
Provides addressed communications for devices that are not directly
addressable themselves.
Can be optimized for point to point, point to multi-point and full mesh
networks.
Supports group and all-call broadcast transmissions.
Built in CSMA/CA algorithm minimizes transmission collisions to maximize
channel efficiency and utilization.
Individual TS4000s can be configured as store-and-forward data repeaters to
extend radio network coverage.
Remote Diagnostics
Allows the status of remote TS4000s to be checked, over the air, from any
other TS4000.
Parameters include: RSSI (inbound, outbound and repeater), Input Voltage,
Radio Voltage, Temperature, Path (direct of through one or more store and
forward repeaters), and Transmit Power (not available on all units).
Allows for the test and verification of a system independent of host
equipment (RTU, GPS, etc,).
Provides easy determination of the radio coverage and signal quality
between TS4000s.
Available while the system is in normal operation.
Can be used through Serial Port 1 or Serial Port 2 of the TS4000.
Windows display software provided, free of charge, with the TS4000
Configuration Software.
Remote Diagnostics function is available to other equipment through the use
of control strings.
Upgrade available for all TS4000s. Contact Teledesign for pricing.
PC Configurable
Windows based configuration software provides quick setup and testing.
Flash memory program storage allows for easy in field firmware upgrades.
AirTest is included with the TS4000 configuration program. AirTest is a
general purpose wireless modem test program which can be used to verify
operation and to gather performance statistics (BER) about the link between
modems.
Rugged and Reliable
Optional watertight housing and connections designed to withstand abuse
from field and marine use.
External interfaces protected against voltage transients, reverse polarity,
electrical shorts and high VSWR.
Two year warranty.
Free technical support provided during all phases of installation and use.