User's Manual
Table Of Contents
- Copyright
- Disclaimer
- Emissions
- _
- Table of Contents
- _
- TS4000 Overview
- _
- Configuration Program
- _
- Serial Port
- _
- Radio Setup
- _
- AirNet Packet Protocol
- Overview
- Configuration Options
- Control and Status Strings
- Master-Slave System Setup
- Polled System with Store and Forward Repeaters
- CSMA System Setup
- _
- GPS Configuration
- _
- Testing
- Remote Diagnostics
- Upgrading Firmware
- _
- Licensing
- _
- Service and Support
- _
- Warranty
- _
- Appendix A - Serial Ports
- _
- Appendix B – ASCII Character Set
- _
- _
- Appendix C – Control and Status Strings
- _
- Appendix D – Internal Jumper Block
- _
TS4000 Radio Modem User’s Manual Upgrading Firmware 73
Upgrading Firmware
The TS4000 comes with flash program memory that allows the firmware to be
easily upgraded in the field. Firmware is upgraded with the upgrade program
which is included as part of the TS4000 configuration program.
1) Attach the TS4000 to a PC serial port.
2) Start the upgrade program by pressing the Upgrade Firmware button on the
main screen of the configuration program.
3) Select the firmware version or firmware option to upgrade to.
a) If the desired firmware version does not show up, us the Find File button
(or menu) to manually search for the necessary file.
4) Press the Connect to Modem button to connect the upgrade program to the
TS4000.
5) Press the Upgrade button and wait for the upgrade to complete.
Upgrading