User's Manual
Table Of Contents
- Copyright
- Disclaimer
- Emissions
- _
- Table of Contents
- _
- TS4000 Overview
- _
- Configuration Program
- _
- Serial Port
- _
- Radio Setup
- _
- AirNet Packet Protocol
- Overview
- Configuration Options
- Control and Status Strings
- Master-Slave System Setup
- Polled System with Store and Forward Repeaters
- CSMA System Setup
- _
- GPS Configuration
- _
- Testing
- Remote Diagnostics
- Upgrading Firmware
- _
- Licensing
- _
- Service and Support
- _
- Warranty
- _
- Appendix A - Serial Ports
- _
- Appendix B – ASCII Character Set
- _
- _
- Appendix C – Control and Status Strings
- _
- Appendix D – Internal Jumper Block
- _
TS4000 Radio Modem User’s Manual AirNet Packet Protocol 36
These configuration options are set using the Packet for Port 1 and Packet for
Port 2 tabs of the Modem Configuration.
Control Description
Individual Address The individual address of this modem.
Group Address The group address of this modem. The group address is
used to isolate different sets of individual addresses. It is
also used to filter group broadcast transfers.
Packet for Port 1 /
Packet for Port 2
Modem Address