User's Manual
Table Of Contents
- Copyright
- Disclaimer
- Emissions
- _
- Table of Contents
- _
- TS4000 Overview
- _
- Configuration Program
- _
- Serial Port
- _
- Radio Setup
- _
- AirNet Packet Protocol
- Overview
- Configuration Options
- Control and Status Strings
- Master-Slave System Setup
- Polled System with Store and Forward Repeaters
- CSMA System Setup
- _
- GPS Configuration
- _
- Testing
- Remote Diagnostics
- Upgrading Firmware
- _
- Licensing
- _
- Service and Support
- _
- Warranty
- _
- Appendix A - Serial Ports
- _
- Appendix B – ASCII Character Set
- _
- _
- Appendix C – Control and Status Strings
- _
- Appendix D – Internal Jumper Block
- _
TS4000 Radio Modem User’s Manual Configuration Program 10
Choose the Retrieve Modem Hardware menu to read and display the modem
hardware details. These include details on the firmware version and memory
configuration. These modem hardware values are set at the factory based on
the modem hardware included in the TS4000 and cannot be changed.
Choose the Retrieve Radio Hardware menu to read and display the radio
hardware details. This includes details about the radio’s frequency, channel
spacing and transmit power. These values are set at the factory based on the
radio hardware included in the TS4000 and cannot be changed.
Modem Hardware
Screen
Radio Hardware
Screen