User's Manual

TS4000 Radio Modem User’s Manual Configuration Program 8
The configuration of the TS4000 can be read out of the modem by selecting the
Retrieve Configuration command from the Modem
menu or by pressing the Retrieve Configuration
button.
To program a configuration into the TS4000, use
the Program Configuration command from the
Modem menu or the Program Configuration
button.
CAUTION: Programming a configuration into
the TS4000 will write over (destroy) the
configuration currently in the TS4000. To avoid
losing the TS4000’s configuration information,
save the configuration by retrieving it and then
saving it as a PC file.
Configurations can be stored and recalled as PC files. This is done using the
commands under the File menu or the corresponding
buttons.
Command Action
New/Default Create a new file with default values.
New/Default GPS Create a new GPS file with default values. The GPS file is a
stripped down version with just the controls needed for GPS
applications.
Open Open a previously stored file. The user is prompted with a
directory and file list.
Close Close the active file.
Save Save the active file under the current name.
Save As Save the active file under a different name or in a different
directory. The user is prompted with a directory and file list.
Convert to Converts the file between the GPS and standard format.
Recent File List This shows the last ten open files. A file can be recalled by
selecting its name from the list.
Programming and
Retrieving
Configurations
Storing
Configurations