Datasheet

ManualsBrandsTele ManualsAutomationTime Lag Relay Multifunction

Subject to alterations and errors

Release 02/04

Timers - GAMMA series

16 functions

16 time ranges

Connection of remote potentiometer possible

Supply voltage selectable via power modules

2 change over contacts

Width 22.5mm

Industrial design

Technical data

1. Functions

1 delayed contact (terminals 15-16-18) and

1 instantaneous contact (terminals 25-26-28)

E11 ON delay

R11 OFF delay with control contact

Es11 ON delay with control contact

Wu11 Single shot leading edge voltage controlled

Ws11 Single shot leading edge with control contact

Wa11 Single shot trailing edge with control contact

Bi11 Flasher pulse first

Bp11 Flasher pause first

2 delayed contacts

E20 ON delay

R20 OFF delay with control contact

Es20 ON delay with control contact

Wu20 Single shot leading edge voltage controlled

Ws20 Single shot leading edge with control contact

Wa20 Single shot trailing edge with control contact

Bi20 Flasher pulse first

Bp20 Flasher pause first

2. Time ranges

Time range Adjustment range

1s 50ms 1s

3s 150ms 3s

10s 500ms 10s

30s 1500ms 30s

1min 3s 1min

3min 9s 3min

10min 30s 10min

30min 90s 30min

1h 3min 1h

3h 9min 3h

10h 30min 10h

30h 90min 30h

1d 72min 1d

3d 216min 3d

10d 12h 10d

30d 36h 30d

3. Indicators

Green LED ON: indication of supply voltage

Green LED flashes: indication of time period

Yellow LED ON/OFF: indication of relay output

4. Mechanical design

Self-extinguishing plastic housing, IP rating IP40

Mounted on DIN-Rail TS 35 according to EN 50022

Mounting position: any

Shockproof terminal connection according to VBG 4

(PZ1 required), IP rating IP20

Tightening torque: max. 1Nm

Terminal capacity:

1 x 0.5 to 2.5mm² with/without multicore cable end

1 x 4mm² without multicore cable end

2 x 0.5 to 1.5mm² with/without multicore cable end

2 x 2.5mm² flexible without multicore cable end

5. Input circuit

Supply voltage:

12 to 400V AC terminals A1-A2 (galvanically separated)

selectable via power modules TR2

Tolerance: according to specification of power module

Rated frequency: according to specification of power module

Rated consumption: 2VA (1.5W)

Duration of operation: 100%

Reset time: 100ms

Residual ripple for DC: -

Drop-out voltage: >30% of the supply voltage

Overvoltage category: III (according to IEC 60664-1)

Rated surge voltage: 4kV

6. Output circuit

2 potential free change over contacts

Rated voltage: 250V AC

Switching capacity (distance <5mm): 750VA (3A / 250V AC)

Switching capacity (distance >5mm): 1250VA (5A / 250V AC)

Fusing: 5A fast acting

Mechanical life: 20 x 10

operations

Electrical Life: 2 x 10

operations

at 1000VA resistive load

Switching frequency: max. 60/min at 100VA resistive load

max. 6/min at 1000VA resistive load

(according to IEC 947-5-1)

Overvoltage category: III (according to IEC 60664-1)

Rated surge voltage: 4kV

7. Control contact

Activation: bridge Y1-Y2

Potential free: yes, basic isolation against input

and output circuit

Loadable: no

Control voltage: max. 5V

Short circuit current: max. 1mA

Line length: max. 10m

Control pulse length: min. 50ms

8. Remote potentiometer (not included)

The internal potentiometer is de-activated when a remote potentio-

meter is connected !!!

Connections: 1MΩ potentiometer (type RONDO R2),

terminals Z1-Y2

Line type: twisted pair

Control voltage: max. 5V

Short circuit current: max. 5µA

Line length: max. 5m

G2ZMF11

3.01-2

Summary of content (4 pages)

PAGE 1
G2ZMF11 Timers - GAMMA series 16 functions 16 time ranges Connection of remote potentiometer possible Supply voltage selectable via power modules 2 change over contacts Width 22.5mm Industrial design Technical data Subject to alterations and errors 1.
PAGE 2
G2ZMF11 Technical data 9. Accuracy Base accuracy: Frequency response: Adjustment accuracy: Repetition accuracy: Voltage influence: Temperature influence: 10. Ambient conditions ±1% (of maximum scale value) using 1MΩ remote potentiometer ≤5% (of maximum scale value) using 1MΩ remote potentiometer <0.5% or ±5ms ≤0.
PAGE 3
G2ZMF11 Functions Flasher pulse first (Bi11) When the supply voltage U is applied, the instantaneous contact and the delayed contact switch into on-position (yellow LED illuminated) and the set interval t begins (green LED flashes). After the interval t has expired, the delayed contact switches into off-position (yellow LED not illuminated) and the set interval t begins again. The delayed contact is triggered at a ratio of 1:1 until the supply voltage is interrupted.
PAGE 4
G2ZMF11 Functions Single shot trailing edge with control contact (Wa20) The supply voltage U must be constantly applied to the device (green LED illuminated). Closing the control contact S has no influence on the condition of the output relay R. When the control contact is opened, the output relay switches into on-position (yellow LED illuminated) and the set interval t begins (green LED flashes).