Datasheet

TIME RELAY / MULTIFUNCTION TIME RELAY
Page 4 of 6
U
R
LED U
<t
t
U
LED U
R
t
<t
t
U
LED U
R
t t
U
LED U
R
tt
U
R
LED U
t
t
t
t t
ON delay (E)
When the supply voltage U is applied, the set interval t begins
(green LED U illuminated). After the interval t has expired the
output relay R switches into on-position. This status remains
until the supply voltage is interrupted. If the supply voltage
is interrupted before the expiry of the interval t, the interval
already expired is erased and is restarted when the supply
voltage is next applied.
OFF-Delay without auxiliary voltage (A)
When the supply voltage U is supplied, the output relay R swi-
ches into on-position (green LED U illuminated). If the supply
voltage is interrupted (green LED U not illuminated), the set
interval t begins. After the set interval t has expired the output
relay R switches into o-position. If the supply voltage is re-
connected before the interval t has expired the interval already
is erased and is restarted with the next cycle.
Maintained single shot trailing edge (nWa)
When the supply voltage U is supplied, the output relay R
remains into o-position (green LED U illuminated). As soon
as the supply voltage is interrupted the output relay switches
into on-position and the set interval t begins (green LED not
illuminated). After the set interval t has expired the output
relay switches into o-position. When the supply voltage is re-
connected before the interval t has expired, the unit continue
to perform the actual single shot.
Maintained single shot leading edge (nWu)
When the supply voltage U is applied (green LED U illumina-
ted), the output relay R switches into on-position and the set
interval t begins (green LED U/t ashes). After the interval t has
expired the output relay switches into o-position. This status
remains until the supply voltage is interrupted. If the supply
voltage is reconnected before the interval t has expired, the
unit continue to perform the actual single shot.
Maintained single shot leading and trailing edge (nWuWa)
When the supply voltage U is applied, the output relay R
switches into on-position and the set interval t begins (green
LED U illuminated). After the interval t has expired the output
relay switches into o-position. As soon as the supply voltage
is interrupted the output relay switches into on-position again
and the set interval t begins (green LED not illuminated).
After the set interval t has expired the output relay switches
into o-position. If the supply voltage is interrupted (nWu) or
reconnected (nWa) before the interval t has expired the unit
continue to perform the actual single shot.
Note:
After transport the output relay maybe in any position. The
correct
operation will be given after the rst cycle.
FUNCTIONS
http://tele-online.com
VEO
V2ZA10 3MIN 24-240V AC/DC
Art.Nr.: 125500
V2ZA10P 3MIN 24-240V AC/DC
Art.Nr.: 125510