Specifications

English

TS6206 DT

2 Product description and connections

2.1 Front panel

1. SIGNAL LED indicator of antenna signal presence.

2. STANDBY LED indicator of Standby status.

3. IR Infrared sensor for remote control.

4. CNANNEL  Previous channel button.

5. CHANNEL  Next channel button.

ON / Stand-by button.

2.2 Back panel and connections

CAUTION

x It is good practice to connect the receiver with other appliances (e.g. TV, VCR, HI-FI, etc.) and the antenna before

plugging in the mains lead. When the receiver is powered electrical voltage differences may be created when

plugging in the jacks, which may generate currents that could damage the appliances.

x The direct TV SCART connection should always be used as a first operating test, since other more complex

connection sequences may give malfunctions that are not caused by faults or defects of the actual appliances but by

problems of incompatibility.

1. RF IN Antenna input.

2. TO TV - LOOP OUT Antenna TV loop through output.

3. TV SCART TV SCART connection

4. VCR SCART Video recorder SCART connection

5. SPDIF - COAXIAL Digital Audio output for home-theatre amplifier.

6. RS232 serial port RS232

7. AC Mains lead for 230 Volt AC, 50Hz