User Guide

ENGLISH
Product description
1.4 Connections
The following inputs and outputs are available behind the TV:
1.
CI/CI+
: housing for CI/CI + common interface modules.
2.
USB
(x2): USB2.0 ports for connecting USB mass storage devices for multimedia
playback (Media player function).
3.
RF IN (T2/C)
: antenna input (IEC type) for receiving digital terrestrial (DVB-T / T2) or
cable (DVB-C) signal.
4.
RF IN (S2)
: SATELLITE RF Antenna input (type F).
5.
HDMI1
,
HDMI2, HDMI3
: HDMI digital audio-video inputs (v.1.4) for connecting an
external AV source (e.g. a receiver or DVD player) equipped with an HDMI interface.
6.
AV/in (RCA)
: analogue audio-video input for connecting an AV device with a CVBS+
Stereo interface.
7.
Optical
: digital audio output.
8.
LAN
: Ethernet (RJ45) port for connection to the Internet, necessary for the Smart TV
function.
9.
Supply
: 220V AC and 12V DC (external)
1.4.1 Remote Control
Place 2 AAA batteries (not supplied) in the remote control compartment respecting the
correct polarities. Exhausted batteries must be disposed of separately from household
waste and bring to any point of sale or collection.
WARNINGS
To prevent corrosive liquid leakage from damaging the remote control, it is advisable to
remove the batteries if you believe you will not use the device for a long time.
Avoid using different types of batteries such as new and used batteries at the same time.
First installation
Connect the antenna cable (terrestrial and/or satellite) and the ethernet cable (if available).
After turning on the TV, perform the first installation as from wizard, use the arrows and OK
keys to select and confirm:
Step 1,2,3,4. Language/Country/Password/Time Zone Choice;
Step 5. Connecting to the network (cable or wireless)';
a. Cable: the connection to the network is established without any kind of
intervention;
b. Wireless: Select use WiFi, then choose the WiFi network you want to connect to
the TV and enter the password (press OK to invoke virtual keyboard), confirm
selecting Connect;
Step 6. APP "MH-Share", use the QR Code to download and install the app;
Step 7. Choosing the startup mode/source;