manual

bintec W2004n
04.12.2013
Subject to technical alterations
Page 4 / 9
Teldat GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25
E-Mail: [e-mail] - www.teldat.org
Features
Software
Roaming at Client Mode No roaming, normal roaming, slow roaming, fast roaming, user defined roaming
Client Band Select Shifting of clients to 5 GHz band
Client Management Client overload protection (to much clients) and shifting of clients to other APs, if threshold is
reached.
Airtime Fairness Prevent performance limitation by slower or distant clients, which block the network
Roaming Seamless roaming with IAPP (Inter Access Point Protocol), support according 802.11f
Buffer pool For cushioning of peaks
WMM 802.11e QoS Data prioritization for TOS data, 802.11e/WMM
WMM 802.11e power save Support of active WLAN clients, which support 802.11e power save.
U-APSD Unscheduled Automatic Power Save Delivery: this functionality contributes significantly to raise
battery life of Voice-over-WLAN end devices
Internet dialup PPPoE, PPTP (works at stand-alone operation or with WLAN controller, not at Master AP operation)
NTP NTP client, NTP server, manually (works at stand-alone operation or with WLAN controller, not at
Master AP operation)
DNS DNS client, DNS server, DNS relay (works at stand-alone operation or with WLAN controller, not at
Master AP operation)
DHCP DHCP client, DHCP server, DHPC relay (DHCP Server and DHCP Relay works at stand-alone
operation or together with WLAN controller, not at Master AP operation)
HotSpot Requires a license. Works in WLC mode or in stand-alone operation, but not in Master-AP operation.
Operation Modes
WLAN operation mode WLAN Access Point (Managed Access Point; Master Access Point for 6 Aps; Standalone Access Point;
Standalone Access Point + Bridgelink Master)
WLAN operation mode Bridgelink (Point-to-multipoint) with up 8 links
WLAN operation mode Transparent WLAN client to connect directly ethernet devices
WLAN WLAN = Radio off; WLAN = Stand alone Access Point; WLAN = Managed Access Point; WLAN =
Master Access Point for 6 APs
Hardware
Certifications Wi-Fi 802.11abgn Certified
Standards and certifications R&TTE Directive 1999/5/EG; EN 60950-1 (IEC60950); EN 300 328; EN 301 489-17; EN 301 489-1;
EN 301 893; EN 60601-1-2 (medical electrical devices - Part 1-2)
LAN / WAN 2 x 10/100/1000 Mbps Ethernet twisted pair, autosensing, auto MDI/MDI-X
WLAN One high-performance radio module IEEE 802.11bgn Mimo 3x3 and a second high-performance
radio module IEEE 802.11an Mimo 3x3 allow simultaneous operation at 2.4 (100mW) and 5 GHz
(200 mW)
Real time clock Even at power loss the system time will be available for several hours.