High Performance WLAN Access Point bintec W2004n • High performance radio module for simultaneous 2.4/5GHZ op. • 802.11n 3x3 Mimo technolgy with up to 2x450 Mbps PHY rate • 200 mW transmitter power at 5 GHz band • Managed by integr. WLAN controller or stand-alone operation • Two Gigabit Ethernet ports with PoE (Power over Ethernet) • Integrated Mimo antennas for 2.
bintec W2004n High Performance WLAN Access Point The bintec W2004n is an 11n access point with two single-band radio modules, allowing the device to operate in both the 2.4 GHz and 5 GHz bands simultaneously. The both radio modules with mimo 3x3 technique offer 2x450 Mbps bandwidth. Product description The unit is a perfect match for indoor wireless infrastructures designed to provide access over both frequencies. Smartphones, tablets, and older notebooks can connect to the the 2.
In addition to the Access Point operation modes the device could be used as WLAN client for direct connecting of ethernet devices (e.g. printers), to connect ethernet devices with existing wireless LANs. Furthermore it is possible to use the device as bridge in Point-to-Multipoint operation mode with up to eight links. By the fact that a radio module can be used as Access Point and simultaneously as Bridgelink Master, it's easy to realize efficient Wireless Backbones.
Features Software Roaming at Client Mode No roaming, normal roaming, slow roaming, fast roaming, user defined roaming Client Band Select Shifting of clients to 5 GHz band Client Management Client overload protection (to much clients) and shifting of clients to other APs, if threshold is reached. Airtime Fairness Prevent performance limitation by slower or distant clients, which block the network Roaming Seamless roaming with IAPP (Inter Access Point Protocol), support according 802.
Hardware Power supply External wall power supply 230V / 9V DC, 1,3A, with high efficient switching power supply (The wall adapter is a accessory and not include the shipment). PoE Power-over-Ethernet according IEEE 802.3af, compatible with 802.
Wireless LAN (Radio 1) Output power limitation ( Adjustable in following steps: 5, 8,11,14,16 dBm and maximum. Maximal power varies depending without antenna gain) on data rate, frequency band and country setting. Output power @ 2.4 GHz Max. 20dBm Automatic Rate Selection (ARS) Available Transmission rate Automatic Number of spatial streams 1, 2 or 3 (802.11n) Bandwidth (802.11n) 20/40 MHz (bundling of two adjoining 20 MHz channels to one 40 MHz channel) Short guard interval (802.
Wireless LAN (Radio 2) Data rates for 802.11n, 20 MHz MSC0-23 allow up to 216,7 Mbps PHY rate at 20 MHz channel bandwidth, 3 streams, Short guard channel bandwidth intervall Data rates for 802.11n, 40 MHz MSC0-23 allow up to 450 Mbps PHY rate at 40 MHz channel bandwidth, 3 streams, Short guard channel bandwidth intervall Output power limitation ( Adjustable in following steps: 5, 8,11,14,16 dBm and maximum.
Security Inter cell repeating Inter traffic blocking for public HotSpot (PHS) applications for preventing of communication radio client to radio client in a single radio cell. NAT/PAT Network & Port Address Translation / Stateful Packet Inspection: Isolation of complete network from public access Energy Savining Functions Mimo 1x1 shift down The radio modules switching automatic to Mimo 1x1 operation, when no client is connected 802.
Maintenance Monitoring: Interfaces Statistic information of all physical and logical interfaces Monitoring: WLAN Detailed displays for radio, VSS.
