User manual

Field Value
The default value is . You can display the stored messages in
Monitoring->Internal Log.
Maximum Message
Level of Syslog Entries
Select the priority of system messages above which a log
should be created.
System messages are only recorded internally if they have a
higher or identical priority to that indicated, i.e. all messages
generated are recorded at 7 syslog level.
Possible values:
• ,: Only messages with emergency priority are re-
corded.
• ": Messages with emergency and alert priority are recor-
ded.
• ): Messages with emergency, alert and critical prior-
ity are recorded.
• : Messages with emergency, alert, critical and error pri-
ority are recorded.
• : Messages with emergency, alert, critical, error and
warning priority are recorded.
• 2: Messages with emergency, alert, critical, error,
warning and notice priority are recorded.
• 6 (default value): Messages with emergency,
alert, critical, error, warning, notice and information priority are
recorded.
• 7: All messages are recorded.
Maximum Number of
Accounting Log
Entries
Enter the maximum number of accounting entries that are
stored internally in the device.
Possible values are  to .
The default value is .
Manual WLAN Control-
ler IP Address
The feature is only for devices with WLAN controller available.
Enter the IP address of the WLAN controller.
The value can only be modified it the the WLAN controller func-
Teldat GmbH
7 System Management
bintec WLAN and Industrial WLAN 85