User manual

Fig. 31: GUI home page
5.3.1.1 Calling up GUI
(1) Check whether the device is connected and switched on and that all the necessary
cables are correctly connected.
(2) Check the settings of the PC from which you want to configure your device (see Con-
figuring a PC on page 52).
(3) Open a Web browser.
(4) Enter %&44 (or the IP address dynamically assigned by your
DHCP server or the address statically assigned by you with the Dime Manager) in the
web browser's address field.
(5) Enter  in the User field and enter  in the Password field and click LO-
GIN.
You are not in the status menu of your device's GUI (see Status on page 80).
5.3.1.2 Operating elements
GUI window
5 Access and configuration Teldat GmbH
68 bintec WLAN and Industrial WLAN