User manual

Chapter 5 Access and configuration
This chapter describes all the access and configuration options.
5.1 Access Options
The various access options are presented below. Select the procedure to suit your needs.
There are various ways you can access your device to configure it:
• Via your LAN
• Via the serial interface
5.1.1 Access via LAN
Access via one of the Ethernet interfaces of your device allows you to to open the GUI in a
web browser for configuration purposes and to access your device via Telnet or SSH.
Caution
If you carry out the initial configuration with the GUI, this can result in inconsistencies
or malfunctions, as soon as you carry out additional settings using other configuration
options. Therefore, it is recommended that the configuration is continued with the GUI.
If you use SNMP shell commands, continue with this configuration method.
5.1.1.1 HTTP/HTTPS
With a current web browser, you can use the HTML interfaces to configure your device.
The configuration can be set up using the GUI. To do this, enter the IP address of your
device in the address field of your Web browser.
With DHCP server:
• the IP address that your DHCP server assigned to your device
Without DHCP server:
• With direct connection to the configuration PC: the fallback IP address 
• The fixed IP address assigned via the Dime Manager
Press the Enter (Return) key.
5 Access and configuration Teldat GmbH
60 bintec WLAN and Industrial WLAN