User manual

4.8 Software Update
The range of functions of Teldat devices is continuously being extended. These extensions
are made available to you by Teldat GmbH free of charge. Checking for new software ver-
sions and the installation of updates can be carried out easily with the GUI. An existing in-
ternet connection is needed for an automatic update.
Proceed as follows:
(1) Go to the Maintenance->Software &Configuration menu.
(2) Under Action select +% , - and, under Source Location
. -  / 0
(3) Confirm with Go.
The device will now connect to the Teldat GmbH download server and check whether an
updated version of the system software is available. If so, your device will be updated auto-
matically. When installation of the new software is complete, you will be invited to restart
the device.
Caution
After confirming with Go, the update cannot be aborted. If an error occurs during the
update, do not re-start the device and contact support.
Teldat GmbH
4 Basic configuration
bintec WLAN and Industrial WLAN 59