User manual

(4) Click OK.
(5) Go to Wireless LAN->WLAN->Bridge Links->New.
(6) Under Preshared Key enter , for example.
(7) Leave the default settings in all other fields.
(8) Click OK.
(9) Configure a bridge link on the remote device in the same way.
(10) On your local device, in the list Wireless LAN->WLAN->Bridge Links, click on the
icon.
(11) On the menu Wireless LAN->WLAN->Bridge Links-> which opens, click under
Action on the  link.
(12) After the scan, the results are listed. For the list entry you require, click the )
link.
(13) Store the configuration using the Save configuration button above the menu naviga-
tion.
To use the bridge link autoconfiguration function, please also read the WLAN Automatic
Configuration of a Bridge Link Workshop; for additional information, also read the user's
guide chapter Wireless LAN under WLAN->Bridge Links->New.
Manual configuration
(1) Go to Wireless LAN->WLAN->Radio Settings-> .
(2) In Operation Mode select *.
(3) Leave the default settings in all other fields.
(4) Click OK.
(5) Go to Wireless LAN->WLAN->Bridge Links-> .
(6) Under Preshared Key enter , for example.
(7) For Remote MAC Address , enter the MAC address of the bridge to which your bridge
is to set up a connection, e.g. &&&&'&(.
(8) Leave the default settings in all other fields.
(9) Click OK.
(10) Configure a bridge link on the remote device in the same way.
(11) Store the configuration using the Save configuration button above the menu naviga-
tion.
Your device is ready for operation when you have completed the configuration.
The configuration of the device and its integration into your network are now completed.
4 Basic configuration Teldat GmbH
58 bintec WLAN and Industrial WLAN