User manual

(2) On the left-hand side, select Change Advanced Settings.
(3) Go to the Wireless networks tab.
(4) Click Add.
Proceed as follows:
(1) Enter a Network Name, e.g. )#.
(2) Set Network Authentication to !"#!$.
(3) Set Data Encryption to ".
(4) Under Network Key and Confirm Network Key, enter the configured preshared key.
(5) Exit each menu with OK.
Note
Windows XP allows several menus to be modified. Depending on the configuration,
the path to the wireless network connection you want to configure may be different to
that described above.
Configuring the WLAN Adapter under Windows 7
A popup window informs you about all wireless networks within reach. All you have to do is
to configure your connection.
(1) First, click the WLAN icon in the system tray of the task bar. Now Windows 7 displays
you all wireless networkswithin your reach.
(2) Select the VSS of your device and click Connect.
(3) In the opening window, enter the preshared key you have configured for your VSS
and click OK.
4.7 Setting up a bridge link
If you run your device in Bridge mode, you must set up a bridge link.
Not available for bintec W1003n, bintec W2003n, bintec W2003n-ext and bintec
W2004n.
Bridge link autoconfiguration
(1) Go to Wireless LAN->WLAN->Radio Settings-> .
(2) In Operation Mode select *.
(3) Leave the default settings in all other fields.
Teldat GmbH
4 Basic configuration
bintec WLAN and Industrial WLAN 57