User manual

4.5 Modify system password

All Teldat devices are delivered with the same username and password. As long as the

password remains unchanged, they are therefore not protected against unauthorised use.

Make sure you change the passwords to prevent unauthorised access to your device!

Proceed as follows:

(a) Go to the System Management->Global Settings->Passwords menu.

(b) Enter a new password for System Admin Password .

(d) Click OK.

(e) Store the configuration using the Save configuration button above the menu naviga-

tion.

Note the following rules on password use:

• The password must not be easy to guess. Names, car registration numbers, dates of

birth, etc. should not be chosen as passwords.

• The password should contain at least one character that is not a letter (special character

or number).

• The password should be at least 8 characters long.

• Change your password regularly, e.g. every 90 days.

4.6 Setting up a wireless network

Proceed as follows to use your device as an access point:

(1) In GUI select the Assistants->Wireless LAN menu.

(2) Follow the steps shown by the wizard. The wizard has its own online help, which of-

fers all of the information you may require.

(3) Store the configuration using the Save configuration button above the menu naviga-

tion.

Configuring the WLAN Adapter under Windows XP

After installing the drivers for your WLAN card, Windows XP set up a new connection in the

network environment. Proceed as follows to configure the Wireless LAN connection:

(1) Click on Start -> Settings and double-click on Network Connections -> Wireless

Network Connection.

4 Basic configuration Teldat GmbH

56 bintec WLAN and Industrial WLAN