User manual

(5) Follow the on-screen instructions and restart your PC when you have finished.
Allocating PC IP address
Allocate an IP address to your PC as follows:
(1) Select Internet Protocol (TCP/IP) and click Properties.
(2) Choose Use following IP address and enter a suitable IP address, the matching net-
mask, your default gateway and your preferred DNS server.
If you run a DHCP server in your network, you can apply the default Windows setting Ob-
tain IP address automatically and Obtain DNS server address automatically.
Your PC should now meet all the prerequisites for configuring your device.
4.4 IP configuration
In the ex works state, your device is configured in DHCP Client mode and therefore dynam-
ically receives an IP address if you run a DHCP server in your network. If this is not the
case, connect your device directly to the configuration PC and use the fallback IP address
.
Alternatively, you can assign your device the required fixed IP address by using the Dime
Manager.
To do this, install the program from the DVD provided to your configuration PC.
Proceed as follows:
(a) Place the DVD provided in the DVD drive of your configuration PC. The installation
wizard should start automatically. If it does not, open the following file on the DVD us-
ing your file browser: .
(b) Follow the instructions in the installation wizard.
Then carry out the following steps to configure an IP address for your device:
(1) Start the Dime Manager from the Windows Start menu: Start -> Programs -> Teldat-
> Dime Manager.
The following dialog box appears:
Teldat GmbH
4 Basic configuration
bintec WLAN and Industrial WLAN 53