User manual

configuration (see Configuring a PC on page 52).

You can use the Dime Manager to assign a new IP address and the required pass-

word to your device.

Note

Please note:

If your device has obtained an IP address dynamically from a DHCP server operated

in your network for the basic configuration, the fallback IP address 192.168.0.252 is

deleted automatically and your device will no longer function over this address.

However, if you have set up a connection to the device over the fallback IP address

192.168.0.252 or have assigned an IP address with the Dime Manager in the basic

configuration, you will only be able to access your device over this IP address. The

device will no longer obtain an IP configuration dynamically over DHCP.

Use the following access data to configure your device in an ex works state:

• User Name: 

• Password: 

Note

All Teldat devices are delivered with the same username and password. As long as

the password remains unchanged, they are therefore not protected against unauthor-

ised use. Make sure you change the passwords to prevent unauthorised access to

your device!

How to change the passwords is described in Modify system password on page 56.

4.1.2 Software update

Your device contains the version of the system software available at the time of production.

More recent versions may have since been released. You can easily perform an update

with the GUI using the Maintenance->Software &Configurationmenu.

For a description of the update procedure, see Software Update on page 59.

Teldat GmbH

4 Basic configuration

bintec WLAN and Industrial WLAN 49