User manual

pole brackets ( part number 5020591700) are available.
Warning
Before drilling, make sure that there are no building installations where you are drilling.
If gas, electricity, water or waste water lines are damaged, you may endanger your life
or damage property.
• Screw the mount to the wall with the 2 screws.
• Hang the device in the mount with the screw nut but do not tighten it. Make sure the
device connections are accessible.
• Protect the device against theft with the lock supplied.
Fig. 19: Wall mounting of the bintec WIx065n (standard design and with theft protection)
3.4.2 Connectors
All the connections are located on the underside of the device.
bintec WI1065n and bintec WI2065n have two Ethernet ports and a serial interface.
The connections are arranged as follows:
3 Installation Teldat GmbH
36 bintec WLAN and Industrial WLAN