User manual

Field Description
Data Rate mbps
Shows the current clock rate of data received on this WDS link
in Mbps.
Rate For each of the specified data rates, displays the values for Tx
Packets and Rx Packets.
21.4.4 Bridge Links
In the Monitoring->WLAN->Bridge Links menu, current values and activities of the bridge
links are displayed.
Fig. 212: Monitoring->WLAN->Bridge Links
Values in the Bridge Links list
Field Description
Bridge Link Descrip-
tion
Shows the name of the bridge link.
Remote MAC Shows the MAC address of the bridge link partner.
Uptime Shows the time in hours, minutes and seconds for which the
bridge link in question is active.
Tx Packets Shows the total number of packets sent.
Rx Packets Shows the total number of packets received.
Signal dBm Shows the received signal strength in dBm.
Noise dBm Shows the received noise strength in dBm.
Data Rate mbps Shows the current clock rate of data received on this bridge link
in Mbps.
If required, the Test link can be used to launch a link test.
The link test provides all the data necessary for checking the quality of the bridge link. The
21 Monitoring Teldat GmbH
472 bintec WLAN and Industrial WLAN