User manual

Fig. 18: Connection options bintec WIx065n
When setting up and connecting, carry out the steps in the following sequence:
(1) Antennas
Screw the standard antennas supplied on to the connectors provided for this pur-
pose.
(2) LAN
For the standard configuration of your device via Ethernet, connect port ETH1 or
ETH2 of your device to your LAN using the Ethernet cable supplied. The device
automatically detects whether it is connected to a switch or directly to a PC.
Use just one of the ports ETH1 and ETH2, the second port is used to cascade a
number of devices. If you use both Ethernet connections on the same switch, loops
may be formed.
The standard patch cable (RJ45-RJ45) is symmetrical. It is therefore not possible to
mix up the cable ends.
3 Installation Teldat GmbH
34 bintec WLAN and Industrial WLAN