User manual

Fig. 17: Underside of the bintec WIx040n with the HW and Cfg reset buttons
3.4 bintec WI1065n and WI2065n
3.4.1 Setting up and connecting
Note
All you need for this are the cables and antennas supplied with the equipment.
Note
For the bintec WIx065n series devices, a screw terminal bar is included as standard
for power supply.
bintec WI1065n is an outdoor access point with a single radio module and three external
antennas, bintec WI 2065n is equipped with two radio modules and four external anten-
nas.
Devices of the industrial WLAN series with 802.11n support are fitted with a unit that heats
the radio module to operating temperature when the temperature falls below 10 degrees
Celsius. Once this temperature has been reached, the device continues with the start-up
process. During the heating phase the red Failure LED flashes.
Teldat GmbH
3 Installation
bintec WLAN and Industrial WLAN 33