User manual

Property Value
(W x L x H)
Weight approx. 1,200 g (with WLAN modules)
LEDs
bintec WI1040n 6 (1x Failure, 1x Status, 3x
WLAN, 2x Ethernet, 1x SFP)
bintec WI2040n 7 (1x Failure, 1x Status, 3x
WLAN, 2x Ethernet, 1x SFP)
Power consumption of the device 5-24 Watt, depending on extensions
Voltage supply Earth conductor/connection to earth 5-20W. All
devices must be earthed.
24 V ± 30 % DC 1.1 A with reverse voltage protec-
tion, insulated 3-pole
PoE on Ethernet 1 Class 0 (insulated) with max.
two WLAN modules
Protection against theft Theft protection is available as an option
Temperature sensor Temperature monitoring and software-controlled
actions possible
Environmental requirements:
Storage temperature -40 °C to +85 °C
Operating temperature
-25 °C to +70 °C
Relative atmospheric humidity 10 % to 95 % (non-condensing)
Room classification
Operate only in dry rooms
Available interfaces:
Serial interface V.24 Permanently installed, supports Baud rates: 1200,
2400, 4800, 9600, 19200, 38400, 57600, 115200
Baud
Ethernet IEEE 802.3 LAN Permanently installed (twisted pair only), 10/100
mbps, autosensing, MDI/MDIX 2x 10/100 Base T/
TX
Relay An alarm using relay is possible in the event of
overtemperature or error: potential-free working
contact, 42 V AC 1 A / 30 V DC 2 A
Optical interface Module slot for optical interface 100 mbps LWL
3 Installation Teldat GmbH
30 bintec WLAN and Industrial WLAN