User manual

Cable sets/mains unit/other Software Documentation
bintec WI2040n
Ethernet cable (RJ-45, STP)
Serial cable (D-SUB9)
4 external standard antennas
Self-adhesive feet to allow the
device to be used as a desktop
device
Blind stops for SFP
SD slot cover with screw
3-pole screw terminal bar for
the power supply
2-pole screw terminal bar for
relay
Mounting bracket for wall
mounting
1 screw pin set
Blind stops for Ethernet inter-
faces
Companion
DVD
Quick Install Guide (printed)
R&TTE Compliance Informa-
tion (printed)
User's Guide (on DVD)
Safety notices
3.3.6 General Product Features
The general product features cover performance features and the technical prerequisites
for installation and operation of your device.
The features are summarised in the following table:
General Product Features bintec WI1040n and bintec WI2040n
Property Value
Variants:
bintec WI1040n An internal wireless module, 3 external antenna
(WLAN 1 Ant.1, WLAN 1 Ant.2, WLAN 1 Ant.3)
bintec WI2040n Two internal wireless modules, 4 external antenna
(WLAN 1 Ant.1, WLAN 1 Ant.2, WLAN 2 Ant.1,
WLAN 2 Ant.2)
Dimensions and weights:
Equipment dimensions without cable 220 mm x 185 mm x 42 mm without feet
Teldat GmbH
3 Installation
bintec WLAN and Industrial WLAN 29