User manual
Field Description
Password
Only for Command Type = ) = and
Action = )!
To obtain certificates, you may need a password from the certi-
fication authority. Enter the password you received from the cer-
tification authority here.
Key Size
Only for Command Type = ) = and
Action = )!
Select the length of the key to be created. Possible values are
' (default value) to ' and '.
Autosave Mode
Only for Command Type = ) = and
Action = )!
Select whether your device automatically stores the various
steps of the enrolment internally. This is an advantage if enrol-
ment cannot be concluded immediately. If the status has not
been saved, the incomplete registration cannot be completed.
As soon as the enrolment is completed and the certificate has
been downloaded from the CA server, it is automatically saved
in the device configuration.
The function is enabled by default.
Use CRL
Only for Command Type = ) = and
Action = )!
Define the extent to which certificate revocation lists (CRLs) are
to be included in the validation of certificates issued by the own-
er of this certificate.
Possible values:
• " (default value): In case there is an entry for a CDP, CRL
distribution point this should be evaluated in addition to the
CRLs globally configured in the device.
• L: CRLs are always checked.
• 2: No checking of CRLs.
Select radio
Only for Command Type = 1;D ."2 * and
1;D ."2 *
18 Local Services Teldat GmbH
414 bintec WLAN and Industrial WLAN