User manual
Field Description
Select the direction of the data traffic whose values should be
monitored as initiating an operation.
Possible values:
• <B (default value): Incoming data traffic is monitored.
• /B: Outgoing data traffic is monitored.
Interface Traffic Condi-
tion
Only for Event Type 6 /
Select whether the value for data traffic must be
1 (default value) or . the value specified in /#
/ in order to initiate the operation.
Transferred Traffic
Only for Event Type 6 /
Enter the desired value in kBytes for the data traffic to serve as
comparison.
The default value is .
Destination IP Address
Only for Event Type ! /
Enter the IP address whose accessibility is to be checked.
Source IP Address
Only for Event Type ! /
Enter an IP address to be used as sender address for the ping
test.
Possible values:
• " (default value): The IP address of the interface
over which the ping is sent is automatically entered as sender
address.
• %: Enter the desired IP address in the input field.
Status
Only for Event Type ! /
Select whether Destination IP Address < must be
(default value) or + in order to initiate the opera-
tion.
Interval
Only for Event Type ! /
18 Local Services Teldat GmbH
402 bintec WLAN and Industrial WLAN