User manual

Fig. 173: Local Services->DHCP Server->DHCP Relay Settings

The menu Local Services->DHCP Server->DHCP Relay Settings consists of the follow-

ing fields:

Fields in the Basic Parameters menu.

Field Description

Primary DHCP Server Enter the IP address of a server to which BootP or DHCP re-

quests are to be forwarded.

Secondary DHCP Serv-

Enter the IP address of an alternative BootP or DHCP server.

18.5 Scheduling

Your device has a event scheduler, which enables certain standard actions (for example,

activating and deactivating interfaces) to be carried out. Moreover, every existing MIB vari-

able can be configured with any value.

You specify the Actions you want and define the Trigger that control when and under

which conditions the Actions are to be carried out. A Trigger may be a single event or a

sequence of events which are combined into an Event List. You also create an event list

for a single event, but it only contains one event.

Actions can be initiated on a time-controlled basis. Moreover, the status or accessibility of

interfaces or their data traffic may lead to execution of the configured actions, or also the

validity of licences. Here also, it is possible to set up every MIB variable as initiator with any

value.

To take the event scheduler live, enable the Schedule Interval under Options. This inter-

val species the time gap in which the system checks whether at least one event has oc-

curred. This event is used as the initiator for a configured action.

18 Local Services Teldat GmbH

398 bintec WLAN and Industrial WLAN