User manual

Field Description
specified port number is verified. If a port range is to be
checked, enter the upper limit here.
Possible values are  to (.
Source Port Range Only for Protocol = /)!, +7!4/)! or +7!
In the first field, enter the source port to be checked, if applic-
able.
If a port number range is specified, in the second field enter the
last port of the port range. By default the field does not contain
an entry. If a value is displayed, this means that the previously
specified port number is verified. If a port range is to be
checked, enter the upper limit here.
Possible values are  to (.
Type
Only for Protocol = 6)=!
The Type field shows the class of ICMP messages, the Code
field specifies the type of message in greater detail.
Possible values:
• ", (default value)
•  <%,
• 7 
•  H
• <
• 
• / :
• ! !
• /%
• /% <%,
• 6 <F
• 6 <%,
• " =5 <F
• " =5 <%,
17 Firewall Teldat GmbH
372 bintec WLAN and Industrial WLAN