User manual

Property Value
bintec W1002n One internal wireless module, 3 external antennas
Dimensions and weights:
Equipment dimensions without cable
(W x L x H)
163 mm x 168 mm x 50 mm
Weight approx. 430 g
LEDs 4 (1x Status, 1x WLAN, 2x Ethernet)
Power consumption of the device 5-10 Watt, depending on extensions
Voltage supply External switched-mode power supply 12 V DC, 1.25 A
PoE on Ethernet 1 Class 0 (insulated) with one WLAN
module. A Gigabit PoE injector is available as an access-
ory (part number 5530000082).
Environmental requirements:
Storage temperature -10 °C to +70 °C
Operating temperature 0 °C to 40 °C
Relative atmospheric humidity 10 % to 95 % (non-condensing)
Room classification Only use in dry rooms.
Available interfaces:
Serial interface V.24 Permanently installed, supports Baud rates: 1200, 2400,
4800, 9600, 19200, 38400, 57600, 115200 Baud
Ethernet IEEE 802.3 LAN (2-port switch) Permanently installed (twisted pair only), 10/100 mbps,
autosensing, MDIX
Available sockets:
Serial interface V.24 9-pin Sub-D connector
Ethernet interface RJ45 socket
Antennas:
Antenna connection RTNC socket
Transmit Power max. 100 mW (20 dBm) EIRP
Frequency bands 2.4 GHz Indoor/Outdoor (2412-2,472 MHz)
5 GHz Indoor (5150-5350 MHz)
5 GHz Outdoor (5470-5725 MHz)
5 GHz BFWA (5755-5875 MHz) only in Germany and
Great Britain (reporting obligations in Germany, licencing
obligations in Great Britain).
3 Installation Teldat GmbH
20 bintec WLAN and Industrial WLAN