User manual

LED Status Information
on (flickering) At least one client is registered and
there is data traffic.
on (flashing fast) BLD (Broken Link Detection) active
on (flashing fast) 5 GHz scan active
ETH 1/2 off No cable or no Ethernet link
on Cable plugged in and link
on (flickering) Cable plugged in and link with data
traffic
3.2.5 Scope of supply
Your device is supplied with the following parts:
Cable sets/mains unit/
other
Software Documentation
bintec W1002n Ethernet cable (RJ-45,
STP)
Plug-in power pack (12 V/
230 V)
3 external standard anten-
nas
Self-adhesive feet to allow
the device to be used as a
desktop device
2 screws and 2 raw plug for
fastening to the wall
Companion
DVD
Quick Install Guide
(printed)
R&TTE Compliance Inform-
ation (printed)
User's Guide (on DVD)
Safety notices
3.2.6 General Product Features
The general product features cover performance features and the technical prerequisites
for installation and operation of your device.
The features are summarised in the following table:
General Product Features bintec W1002n
Teldat GmbH
3 Installation
bintec WLAN and Industrial WLAN 19