User manual

Field Description
selected Ethernet port.
Local PPTP IP Address Assign the PPTP interface an IP address that is used as the
source address.
The default value is '.
Remote PPTP IP Ad-
dress
Enter the IP address of the PPTP partner.
The default value is (.
LCP Alive Check Select whether the availability of the remote terminal is to be
checked by sending LCP echo requests or replies. This makes
it possible to switch to a backup connection more quickly in the
event of line faults.
The function is enabled with .
The function is enabled by default.
15.1.3 IP Pools
The IP Pools menu displays a list of all IP pools.
Your device can operate as a dynamic IP address server for PPP connections. You can
use this function by providing one or more pools of IP addresses. These IP addresses can
be assigned to dialling-in connection partners for the duration of the connection.
Any host routes entered always have priority over IP addresses from the address pools.
This means that, if an incoming call has been authenticated, your device first checks
whether a host route is entered in the routing table for this caller. If not, your device can al-
locate an IP address from an address pool (if available). If address pools have more than
one IP address, you cannot specify which connection partner receives which address. The
addresses are initially assigned in order. If a new dial-in takes place within an interval of
one hour, an attempt is made to allocate the same IP address that was assigned to this
partner the previous time.
15.1.3.1 Edit or New
Choose theNew button to set up new IP address pools. Choose the icon to edit existing
entries.
Teldat GmbH
15 WAN
bintec WLAN and Industrial WLAN 307